Details
PLEASE EXCUSE THE LACK OF PICTURES. PARTS PICS COMING SOON!
Slayer EVOlite—MEUS SCX24 FULLSEND
Comes in BLACK ONLY. Paint and assembly optional. Holler for prices.
Slayer EVOlite Chassis kit
It’s the simplest to build, simplest to swap links, simplest to tune, easiest electronics mounting (when following the parts recommendations), with all the stability, all the break over, all the ground clearance, as much flex as a guy could drool over (or easily tune out), up, down, sideways and even upside down…
…IT’S THE ALL TIME, BEST SLAYER, EVER!
The Slayer EVO chassis is the latest in the Texoma Slayer progression, combining the PRO2 shape ideas from the Slayer Prime and Mono to get the most compact and versatile chassis offering from Texoma RC. Although, everything is more compact, with the new shape and an additional 4mm between rails, there’s more useable space in front of the transmission. Made to run any texoma link set (142-195mm).
OPTIONS!
Build it to fit your terrain! The EVOlite can be built from 142mm all the way to 192mm and provides the same performance throughout the range. Changing lengths does come at a cost of custom driveshafts (reccomend Injora d-hole driveshafts). The 49mm front requires a deadbolt female with longer male cut to fit. The 63mm front requires a longer female or male to make up the difference. The 49mm fronts work best with tires less than 70mm. Kits with the 49mm and 52mm front will come with the 8.5mm low brushless motor mount. For bigger tires, replace bathe low motor mount with the high mount to help prevent motor stall when the tire hits the motor. The small can brushless motors are recommended for the 49mm and 52mm fronts because the tire can stop the motor. For big can brushed motors, the 63mm fronts are recommended. For that reason, the 63mm kits come with the 12mm brushless motor mount.
New 94mm and 108mm cantilever rear link sets provide unmatched stability. Recommend using with Injora 39mm oil filled shocks or similar.
Comes with: Slayer EVOlite MONO chassis in nylon 12, front shock mount, full roof, Cab, screws, 8.5mm brushless motor mount, axle add-on kit (MEUS shock BOA, riser and rear dif skid) and link set of choice.
Cantilever rears come with rear driveshaft extension.
Choose your link set: custom driveshafts marked with an *
49-78*
52-78
49-94*
52-94
49-94 Canti*
52-94 Canti
63-94 Canti
52-108 Canti
63-108 Canti
Recommended parts:
BKTT Cupcake ESC
MOFO NANOBEAST
MOFO SERVOBEAST
Injora d-hole driveshafts*
39mm shocks.
Galaxy 120mah 3s Lipo
NOTES:
—Furitek Python RXF (decased) pairs great with the MOFO BAM. BEST combo for running the 63mm fronts and big tires. however, be weary of brownouts when running a furtiek system.
—For the short front, I run the deadbolt female paired with a cut JLU/C10/gladiator front male. The Injora deadbolt and gladiator rears are the same, so there’s only one piece extra that’s required. I would recommend buying a gladiator and a deadbolt, one each. IF GRINDING DOWN A FEMALE SHAFT, BE SURE TO CHECK WHERE THE TEETH STOP! If not, you could end up with a shiny bendy straw. Not good. lol
—Big Kid Tiny Truck Cupcake ESC with MOFO NANOBEAST and NONBAM are awesome up to 600g with big tires.
—Add NSDRC BEC to your Rockwolf or or support BKTT ESC to get 8.4v to your servo.